Author Archives: admin

Realization of an orthophoto of the Dunkerque city from old silver images taken in 1949.

Post Image

Realization of a period orthophoto for the observation of the territory evolution over time. August 18, 1949. Results obtained from 171 aerial photographs available on the website of IGN.   • Visualize the orthophoto in full resolution (11cm GSD). • Download the subsampled orthophoto in Kmz format (30cm GSD). • Download raw images in jp2 […]

Share Button
Continue Reading

Drone inspection of the respective façades of two buildings with a 65m height.

Post Image

Realization of 8 orthophotos with a 3mm GSD dedicated to the inspection of concrete load-bearing structures. September 2019. Results obtained by building from 1607 and 1862 aerial images taken by the company Marceau Drone Images as part of a benefit for the IVA Drones network. Orthophotos realized in GeoTiff formats for the detection and the […]

Share Button
Continue Reading

Topographic map of a school complex realized by drone and aerial photogrammetry.

Post Image

Autocad topographic map of a 10ha area realized from orthophoto and classified Digital Surface Model. July 2019. Results obtained from 1532 aerial photos taken by the company D-Tection, specializing in aerial surveys. Topographic map realized in Pdf and Dwg formats for the benefit of an architectural firm for the updating of the site and the […]

Share Button
Continue Reading

Long Range Photogrammetry – Topographic survey of the former 112 Air Base (1100ha)

Post Image

Topographic survey of 1100 hectares performed by aerial photogrammetry. Results obtained from 2600 aerial images taken by Artech Drone company.Post processing by Drones Imaging. Orthophoto and Digital Surface Model carried out as part of the rehabilitation of the former Air Base 112. 1.5 hour flight (for datas acquisition part) and delivery of geospatial productions at […]

Share Button
Continue Reading

Aerial inspection of a 19ha photovoltaic power plant by drone and infrared thermography

Post Image

Photovoltaic panel diagnostics – Detection and localization of superheated cells for yield losses evaluation. Results obtained by Tech Drone Service company.Post-processing by Drones Imaging. Infrared thermal orthophoto performed as part of an inspection to detect and locate defective cells affecting the performance of the photovoltaic plant. Below is an extract of deliverable (East area): standardized […]

Share Button
Continue Reading

Water tower inspection by drone – surface analysis

Post Image

Inspection of the water tower walls by drone and aerial photogrammetry. Results obtained from 1225 aerial images taken by the company D-tection.Post-processing by Drones Imaging. Inspection to detect and locate surface defects (concrete break-ups and visible reinforcement rods) on the entire structure. Thanks to the software 3DReshaper, Flatness analysis of the DSM (Digital Surface Model […]

Share Button
Continue Reading

Topographic and bathymetric survey by drone in Corsica

Post Image

Topographic and bathymetric survey of a 55ha quarry for the aquatic depths measurements. Results obtained by photogrammetry from 740 aerial images captured by the company Aerodronescorse and subsequently merged,with more than 100,000 bathymetry points recorded by the company D-tection.Post-processing by Drones Imaging. Topographic survey carried out as part of the annual plans of exploitation with […]

Share Button
Continue Reading

Cliff inspection by drone and photogrammetry in Bonifacio – Corsica

Post Image

Cliff inspection and 3D modeling as part of the redevelopment of the Bonifacio port infrastructure. Corsica, September 2018. Results obtained from 370 aerial images collected in collaboration by the companies Aérodronescorse and I-techdrone. As part of the redevelopment of its port infrastructure, the Territorial Collective of Corsica (CTC) engaged the services of the companies Aérodronescorse, […]

Share Button
Continue Reading

Infrastructure inspection by drone – circularity study of a water tower

Post Image

Circularity study of a water tower by drone and aerial photogrammetry. Results obtained from 211 aerial images taken by the company Adeole. Post-processing by Drones Imaging. Inspection performed as part of a study to detect surface deformations and vertical defects of a circular structure. Realized with 3DReshaper, the calculation of successive horizontal sections over the […]

Share Button
Continue Reading

Auscultation of a water tower walls and automatic damages detection

Post Image

Water tower inspection by drone and concrete structure diagnosis. Results obtained from 211 aerial images taken by the company Adeole. Post-processing by Drones Imaging. Circular inspection carried out as part of a study aimed to automate the step of surface damages detection. Realized with the 3DReshaper software, the flatness analysis of the Digital Surface Model […]

Share Button
Continue Reading

Technological risks – flow analysis and study of pollutant dispersion

Post Image

Study of the hydrographic network of the Kronospan plant site. January 2018. Results obtained from 2068 aerial images taken by D-Tection, company specialized in aerial inspections by drones. Following a fire at its production site, the company Kronospan, specialized in the manufacture of plywoods made contact with the companies D-tection et Drones Imaging to model […]

Share Button
Continue Reading

3D survey of the Cap Champagne cliff – Reunion Island

Post Image

3D modeling of a cliff for stability and erosion analysis. Reunion island, february 2018. Results obtained from 1592 aerial images taken by the company Drone Austral, specialized in technical inspections by drones. The office of Geological and Mining Research (BRGM, in charge of the study and monitoring of geological risks in Reunion Island) solicited the […]

Share Button
Continue Reading

Topographic map & volumetry report by aerial photogrammetry

Post Image

Topographic survey of the Courcy quarry (51). Results obtained from 257 aerial images taken by the company Artech’Drone. Post-processing by Drones Imaging. Topographic map and volumetry report made in .pdf + .dwg formats according to technical and professional standards (Autocad). On this use case, the orthophoto and the Digital Surface Model made it possible to […]

Share Button
Continue Reading

Roof inspection by drone and aerial photogrammetry

Post Image

3d modeling and detection/localization of the sealing plates detachments. Results obtained from 235 aerial shots taken by the company Artech’Drone. Post-processing by Drones Imaging. Analysis carried out as part of an inspection aimed at detecting and locating the detachments of the waterproofing slabs (with 1.5cm minimum tolerance). In this use case and thanks to the […]

Share Button
Continue Reading

Topographic survey of 12300 hectares in Niger for the study of floods in Niamey

Post Image

3D modeling carried out by aerial photogrammetry over a length of 25 km for the prevention of Niger river flood risks. Results obtained from 7000 aerial images taken by the company Drone Africa Service. Post-traitement par Drones Imaging. Niger – Relevé topographique pour l’étude des inondations à Niamey from Drones Imaging on Vimeo. 3D modeling […]

Share Button
Continue Reading

Analysis of swimming pool flatness by drone and aerial photogrammetry

Post Image

3D modeling and analysis of a swimming pool under construction. Results obtained from 310 aerial shots. Post-processing by Drones Imaging. 3D modeling carried out as part of a study to control the flatness of a swimming pool under construction (with a minimum tolerance of 1cm). The analysis of the 3D model made it possible to […]

Share Button
Continue Reading

Thermal infrared imagery processing service

Post Image

New thermal infrared image processing service dedicated to the photovoltaic industry, building and precision farming. Drones Imagingexpands its activity and launches a new service dedicated to infrared data processing with the commercialization of radiometric orthomosaics (whose temperature is measurable in every pixel) and 3D models made from aerial thermal videos (flir, optris or others). Use […]

Share Button
Continue Reading

3D modeling of a tourism residence – Merging lidar and photogrammetry

Post Image

3D modeling by aerial photogrammetry of a roof and merging on a cloud realized by terrestrial lidar system. Results obtained from 314 aerial images taken by the company Altitude Drone Diagnostic. Post-processing by Drones Imaging. 3D scan realized as part of the rehabilitation of ski stations in Val d’Isère. The 3D modeling of roof elements […]

Share Button
Continue Reading

Detection of water stress by drone and infrared thermography

Post Image

Phenotyping Campaign 2017 – Detection of water deficit for the management of irrigation on a citrus plantation. Results obtained from 3087 thermal images taken by the company Aaérodronescorse. Post processing by Drones Imaging. On sensitive plants such as citrus, water deficit is a phenomenon that directly affects physiological variables. It results in a sharp decline […]

Share Button
Continue Reading

Flood simulation for DREAL

Post Image

Flood Simulation carried out on the Loire – village of Goudet. Results obtained from 259 aerial images taken by the company Marceau Drone Images. Post-processing Drones Imaging. Work done within the framework of the risk prevention plan and for the benefit of the DREAL (Regional Directorate for the Environment, Development and Housing). Simulation of a […]

Share Button
Continue Reading